DRYING KILNS SERIES EM with discontinuous vacuum, where a sophisticated hot air distribution system alternating with vacuum phases allows to dry properly planks with half the operating time compared to conventional air systems.
The ISVE EMV series wood dryers are particularly suitable for drying wood boards in the most varied species. These drying plants are called “continuous/discontinuous vacuum” because the vacuum phase can be interrupted by cycles of warm moist air that allow a rapid heating and drying of the wood.
The simple design, the few moving parts, the abundant use of stainless materials and the automaticity of the process also make it possible to use these dryers with low operating costs and high quality standards.
Models of EM with discontinuous vacuum dryers for wooden semi-finished products
Dryers model EM high capacity
High capacity EM vacuum dryers for large carpenter’s workshops The EMV series of discontinuous dryers with capacities from 6 to 50 m3 are suitable for large carpenter’s workshops or for timber yards requiring drying quality together with high productivity. The plant is equipped with a control computer to facilitate the programming of the process. There is no difficulty involved in learning the technology. The variation of each parameter can be displayed by connecting the dryer computer to a normal PC using Windows. With this system, besides having remote control of the cycle, it is possible to store all the process phases. These units host all the technology and know-how developed in 40 years of designing and manufacturing wood treatment plants.
Dryers model EM2V and EM5V
Vacuum dryers for small to medium sized carpenter’s workshops The ISVE EM2V and EM5V vacuum dryer are been designed and manufactured especially for small to medium sized carpenter’s workshops, with small quantities of wood to be dried, but requiring high quality and short drying times. The plant is equipped with a control computer to facilitate the programming of the process. There is no difficulty involved in learning the technology. This system (Vacutronic) can operate using three different modes: completely automatic; semi-automatic; manual. The variation of each parameter can be displayed by connecting the dryer computer to a normal PC using Windows. With this system, besides having remote control of the cycle, it is possible to store all the phase’s process.