Home › Recycling › Shredders › Models › "TRITOTUTTO" MODEL B-70/80D

"TRITOTUTTO" MODEL B-70/80D

Model B-70/80D is a double-shaft shredder with 800x680 mm load door and is equipped with special anti-wear steel cutter and spacer combs.
This machine has been studied for particularly difficult works where it’s necessary a very strong structure and high cutting torque.

Use notes:
Very multipurpose machine suitable for shredding an enormous number of waste materials- even very large. It can be introduced into a line to operate in continuous working.
Recommended for shredding pieces of wood, rags, plastic blocs leather, small tyres, paper, cardboard, packaging, polyethylene banding, plastic film, etc.

zoom zoom zoom

CHARATERISTICS SHREDDER MODEL B-70/80D
installed horsepower KW 15 KW + 15 KW
transmission gears through oil bath reduction gear
n. cutter shafts 2
n. hardened cutters n. Hardened cutters :20
n. spacing combs: 20
n. conveyor shafts  
n. conveyor disks  
mouth mm 800X680
n. average cutter revs./min 16
production Kg/h 1-1,5 t/h
Weight Kg  
safety precautions emergency stop, reversal system in case of overloading
manufactured to EC standards
 		 Yes
   
ACCESSORIES — interchangeable hopper;
— loading and unloading belt
— base size to order;
 

Data and characteristics described are strictly for illustrative purposes.
The manufacturer reserves the right carry out any adjustments deemed necessary.

 

Details SHREDDER MODEL B-70/80D

Characteristics of shredder:

• Very thick welded sheet steel support;
• Support for barrel roller bearings with sealing system against dust and liquids;
• High thickness shafts with 20 special anti-wear steel cutters and 20 spacers to facilitate unloading of shred material:
• New cutter teeth graduated arrangement at 22.5° for a better taking and cutter progress.
• N.2 epicyclic reduction gears with rotation axes parallel to the cutter axis;
• N. 2 motors of 15 KW for a total of 30 KW;
• Drive system in oil bath with steel gears and pinions ;
• 680x800 mm. cutting chamber;
• Welded sheet metal hopper for top loading;
• Base made in stel tubular equipped with protection nets or arranged for the belt.

Characteristics of control system:

• Electrical board built according to CEE rules and provided with power limiting device inverting cutters motion in the case the working charge of the machine is higher than the programmed value;
• Main internal board for the control of all the plant peripheral units.
• Emergency control functions for stopping the plant in the case of accidental introduction of ferrous material.
• External keyboard with liquid crystal display for programming machine parameters and loading systems;
• The production of shredded material varies according to the type of the items to be shredded and the size required. A production of between 1-1,5 t/h can be roughly estimated.
• Made to CE standards.