"TRITOTUTTO" MODEL 50/66

Model 50/66 has a 500x660 mm. load door and is equipped with special conveyor disks besides the cutters.
The type of drive coupled with the interchangeability of the cutters has given the machine a high level of reliability and the width of the material feed area makes it ideal for shredding containers, packaging, bumpers and hollow items in general.

Use notes:
Medium sized multipurpose machine suitable for shredding an enormous number of waste materials - even very large. It can be introduced into a line to operate in continuous working. Recommended for shredding pieces of wood even large sized, rags, plastic, leather, small tyres, paper, cardboard, packaging, polyethylene banding, plastic film, PET bottles, milk bottles, different types of containers, upholstery, bumpers, small trunks, tarpaulin, etc.

Data and characteristics described are strictly for illustrative purposes.
The manufacturer reserves the right carry out any adjustments deemed necessary. 

Details SHREDDER MODEL 50/66

Characteristics of shredder:
• Very thick welded sheet steel support;
• Support for barrel roller bearings with sealing system against dust and liquids;
• High thickness shafts with 26 special anti-wear steel cutters and 26 conveyor disk to facilitate gripping of bulky objects;
• New cutter teeth graduated arrangement at 22.5° for a better taking and cutter progress.
• N.1 epicyclic reduction gears with rotation axes parallel to the cutter axis;
• N.1 7,5 kW motors;
• Drive system in oil bath with steel gears and pinions;
• 500x660 mm. cutting chamber;
• Welded sheet metal hopper with sliding cover for front or top loading.
• Interchangeable screen determining the sizes of the shredded material (optional);
• Base equipped with drawer connectable to the aspiration plant (wood sector) or no. 3 protection nets with frontal gate provided with security micro;

Characteristics of control system:
• Electrical board built according to CEE rules and provided with power limiting device inverting cutters motion in the case the working charge of the machine is higher than the programmed value;
• Main internal board for the control of all the plant peripheral units.
• Emergency control functions for stopping the plant in the case of accidental introduction of ferrous material.
• The production of shredded material varies according to the type of the items to be shredded and the size required. A production of between 150 to 250 Kg/h can be roughly estimated.
• Made to CE standards.

ACCESSORIES:
• Interchangeable screen determining the sizes of the shredded material (diameter 14-16-20-25-30-35 mm)
• Sliding cover upon the hopper with rubber protections
• Shredding chamber inspection door with micro switch