SINGLE-SHAFT SHREDDER MODEL M 40-100
Il macinatore monoalbero M 40-100 è adatto alla lavorazione di elevate quantità di scarti industriali. La pesante struttura rende la macchina idonea ad un impiego gravoso.
A hydraulic control unit allows driving the pusher drawer. Thus, the product to be grinded is pushed towards a tools-holder rotor causing its crushing.
Use notes:
Large sized multipurpose machine suitable for shredding wide range of waste materials. It can be introduced into a line to operate in continuous working.
Recommended for shredding pieces of wood, high thickness plastic material, paper, confidential documents, extruded sheets, small tires, etc.
| CHARATERISTICS | SINGLE SHAFTS SHREDDER MODEL M 40-100 |
| installed power KW | 45 kW (HP 60) |
| drive | by belts |
| Number of rotors | 1 |
| Rotor diameter mm | 400 |
| Rotor length mm | 1000 |
| Number of reversible tools | 58 |
| N° of usable tools sides | |
| Average number of rotor revolutions per min | 85 |
| production Kg/h | 2-3 t/ora |
| Weight Kg | 4700 |
| safety precautions | emergency stop, drawer reversal system |
| manufactured to EC standards |
Yes |
| ACCESSORIES ON REQUEST | — Loading belts; — Interchangeable hopper; — Interchangeable screen; — Shredded material packaging system; — Refiner for timber and plastic (for sizes lower than 14 mm) |
Data and characteristics described are strictly for illustrative purposes.
The manufacturer reserves the right carry out any adjustments deemed necessary.
Details SINGLE-SHAFT SHREDDER MODEL M 40-100
Characteristics of the shredder:
• Strong welded steel framework;
• Support for barrel roller bearings with sealing system against dust and liquids
• High thickness rotor with diameter of 400 mm and length of 1000 mm. It is equipped with 58 tools-holder plates and 58 high alloyed anti-wear tools usable 4 times;
• Steel anti-wear counter-blade adjustable on the framework;
• Pusher drawer with hydraulic driving with 1000 mm of usable run;
• Pulleys and belts drive system to avoid damaging mechanical due to rotor vibrations.
• 1 motor of 45kW (HP 60);
• 1000X 1400 mm cutting chamber;
• Welded sheet metal hopper for top loading;
• Interchangeable screen establishing the size of the shredded material;
• Base equipped with unloading system for shred material evacuation.
Characteristics of control system:
• Electric switchboard complying with EEC standards, equipped with torque limiting device which inverts the direction of the pusher drawer if the work load of the machine exceeds the set value;
• Main internal board for the control of all the plant peripheral units;
• Emergency control functions for stopping the system;
• The production of shredder material varies depending on the type of piece to be ground and the size of the ground items required. On an average it is possible to produce between 1-1,5 t per hour
• Made to CE standards.