The machine is driven by an epicyclical reduction gear whereas the linkage between the cutter holders and conveyors is by oil bath lubricated gears.
Each machine is equipped with a set of spanners to carry out disassembly of the cutters should they need sharpening. A clear technical manual illustrates the methods of carrying out this operation.

All the models are equipped with screens varying from 14 to 38 mm depending on the size of the shredded material required. The smaller the size required the less the machine will produce.

The other features of these machines are:
Operating noise less than 80 dB - shredder and conveyor disks easy to access to facilitate maintenance - interchangeability of disks carried out directly by user - low energy consumption - possibility to shred any nonferrous material, even in the presence of nails, metal wire or stones and rocks - EC certification.

Pos. Description 1 loading hopper 2 hole for lifting and transport 3 machine body 4 electric panel 5 hopper cover 6 motor 7 epicyclical reduction gear 8 feed disks 9 milling group 10 screen grid 11 machine base 12 container with unloading hole